SERVICES

CASE STUDIES

SPONGE-JET

CONTACT

Sponge-Jet: Integrated Systems

The Leader in Clean, Low Dust, Reusable

Abrasive Blasting

Sponge-Jet Integrated Systems combine three essential components of Sponge-Jet Technology:

 

Sponge-Jet Feed Unit™ for the delivery or blasting of Sponge Media™ products.

Sponge-Jet Recycler™ to clean and ready Sponge Media products for reuse.

Vacuum or material-handling system for recovery and transport of Sponge Media.

 

A range of systems both standard and custom are available for various applications.

 

BVAC Pro-4 Integrated System

Integrate all components in a single frame for transport by fork truck, flatbed or crane. The B-VAC is ideal for applications where space is a premium and redeployment time is costly. This is the most popular of Sponge-Jet integrated systems.

Features of the BVAC Pro-4:

  • Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™
  • High-volume, low-noise vacuum ejector
  • High-strength steel frame and integrated ladder
  • Cyclone storage silos
  • High-capacity muffler
  • Blast pressure adjustment
  • Lifting eyes
  • Fork pockets
  • Secondary moisture separator
  • High-volume pressure relief valve
  • Centralized controls for precision monitoring and adjustment
  • Options: Pneumatic or electric vacuum and recycler

 

TRIGON Integrated System

Supports three high-production nozzles while integrating all components in a single frame for transport by fork truck, flatbed or crane. Additionally, the frame can be split for ease of transport in a container or truck. The Trigon is ideal for applications where multiple nozzles are required

Features of the TRIGON:

  • 2-stage continuous flow, 3-port feed unit/vessel
  • Oversized storage hoppers with integrated internal agitation
  • Waste bins in contained high-vacuum chamber for use with a wide variety of industrial vacuums
  • Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™
  • High-strength steel frame capable of being split for container transport
  • Cyclone storage silos
  • High-capacity muffler
  • Blast pressure adjustment
  • Lifting eyes
  • Fork pockets
  • Secondary moisture separator
  • High-volume pressure relief valve
  • Centralized controls for precision monitoring and adjustment
  • No re-pressurization delay for fast response to deadman controls
  • Options: Customer supplied vacuum for flexibility in recovery options Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™

 

Integrated Blasting Room System

Integrates all components in an economical and flexible configuration installed at fixed locations. These systems are well suited for facilities that cannot accommodate costly conventional abrasive blast rooms.

Features of the Blasting Room System:

  • Integrated, vacuum-sealed, closed-top recycler
  • No buried conveyors or raised floors
  • High-capacity muffler
  • Blast pressure adjustment
  • Secondary moisture separator
  • High-volume pressure relief valve
  • Centralized controls for precision monitoring and adjustment
  • Enhanced blast room visibility for better quality surface preparation

 

Each unit contains with the following:

  • Internal agitation assembly keeps Sponge Media abrasives flowing reliably throughout the vessel
  • Adjustable, pneumatic driven, auger metering system assures optimal media flow and maximum efficiency at all blast pressures
  • Integrated E-Stop and remote deadman control system
  • Standardized parts and maximum reliability by design
  • High-quality, industry-standard components for long, trouble-free operation, simplified spare part acquisition and replacement
  • Multi-language labels, instruction manuals and online training tools
  • Color-coded pneumatic lines for easy troubleshooting
  • Extended service, permanently lubricated air motor and auger bearings minimize maintenance and wear

Want to speak to an expert?

Fibron is SSPC certified.
Fibron is certified as a member of the American Concrete Institue. Fibron provides specialized skills in repairing concrete.
Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018

CASE STUDIES

Sponge-Jet: Integrated Systems:

The Leader in Clean, Low Dust, Reusable

Abrasive Blasting

Sponge-Jet Integrated Systems combine three essential components of Sponge-Jet Technology:

 

Sponge-Jet Feed Unit™ for the delivery or blasting of Sponge Media™ products.

Sponge-Jet Recycler™ to clean and ready Sponge Media products for reuse.

Vacuum or material-handling system for recovery and transport of Sponge Media.

 

A range of systems both standard and custom are available for various applications.

 

BVAC Pro-4 Integrated System

Integrates all components in a single frame for transport by fork truck, flatbed or crane. The B-VAC is ideal for applications where space is a premium and redeployment time is costly. This is the most popular of Sponge-Jet integrated systems.

Features of the BVAC Pro-4:

  • Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™
  • High-volume, low-noise vacuum ejector
  • High-strength steel frame and integrated ladder
  • Cyclone storage silos
  • High-capacity muffler
  • Blast pressure adjustment
  • Lifting eyes
  • Fork pockets
  • Secondary moisture separator
  • High-volume pressure relief valve
  • Centralized controls for precision monitoring and adjustment
  • Options: Pneumatic or electric vacuum and recycler

 

TRIGON Integrated System

Supports three high-production nozzles while integrating all components in a single frame for transport by fork truck, flatbed or crane. Additionally, the frame can be split for ease of transport in a container or truck. The Trigon is ideal for applications where multiple nozzles are required.

Features of the TRIGON:

  • 2-stage continuous flow, 3-port feed unit/vessel
  • Oversized storage hoppers with integrated internal agitation
  • Waste bins in contained high-vacuum chamber for use with a wide variety of industrial vacuums
  • Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™
  • High-strength steel frame capable of being split for container transport
  • Cyclone storage silos
  • High-capacity muffler
  • Blast pressure adjustment
  • Lifting eyes
  • Fork pockets
  • Secondary moisture separator
  • High-volume pressure relief valve
  • Centralized controls for precision monitoring and adjustment
  • No re-pressurization delay for fast response to deadman controls
  • Options: Customer supplied vacuum for flexibility in recovery options Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™

 

Integrated Blasting Room System

Integrates all components in an economical and flexible configuration installed at fixed locations. These systems are well suited for facilities that cannot accommodate costly conventional abrasive blast rooms.

Features of the Blasting Room System:

  • Integrated, vacuum-sealed, closed-top recycler
  • No buried conveyors or raised floors
  • High-capacity muffler
  • Blast pressure adjustment
  • Secondary moisture separator
  • High-volume pressure relief valve
  • Centralized controls for precision monitoring and adjustment
  • Enhanced blast room visibility for better quality surface preparation

Each unit contains with the following:

  • Internal agitation assembly keeps Sponge Media abrasives flowing reliably throughout the vessel
  • Adjustable, pneumatic driven, auger metering system assures optimal media flow and maximum efficiency at all blast pressures
  • Integrated E-Stop and remote deadman control system
  • Standardized parts and maximum reliability by design
  • High-quality, industry-standard components for long, trouble-free operation, simplified spare part acquisition and replacement
  • Multi-language labels, instruction manuals and online training tools
  • Color-coded pneumatic lines for easy troubleshooting
  • Extended service, permanently lubricated air motor and auger bearings minimize maintenance and wear
HAVE QUESTIONS?
Fibron is SSPC certified.
Fibron is certified as a member of the American Concrete Institue. Fibron provides specialized skills in repairing concrete.
Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018

SERVICES

SPONGE-JET

CONTACT

Sponge-Jet: Integrated Systems:

The Leader in Clean, Low Dust, Reusable

Abrasive Blasting

Sponge-Jet Integrated Systems combine three essential components of Sponge-Jet Technology:

 

Sponge-Jet Feed Unit™ for the delivery or blasting of Sponge Media™ products.

Sponge-Jet Recycler™ to clean and ready Sponge Media products for reuse.

Vacuum or material-handling system for recovery and transport of Sponge Media.

 

A range of systems both standard and custom are available for various applications.

 

BVAC Pro-4 Integrated System

Integrates all components in a single frame for transport by fork truck, flatbed or crane. The B-VAC is ideal for applications where space is a premium and redeployment time is costly. This is the most popular of Sponge-Jet integrated systems.

Features of the BVAC Pro-4:

Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™

High-volume, low-noise vacuum ejector

High-strength steel frame and integrated ladder

Cyclone storage silos

High-capacity muffler

Blast pressure adjustment

Lifting eyes

Fork pockets

Secondary moisture separator

High-volume pressure relief valve

Centralized controls for precision monitoring and adjustment

Options: Pneumatic or electric vacuum and recycler

TRIGON Integrated System

Supports three high-production nozzles while integrating all components in a single frame for transport by fork truck, flatbed or crane. Additionally, the frame can be split for ease of transport in a container or truck. The Trigon is ideal for applications where multiple nozzles are required.

Features of the TRIGON:

2-stage continuous flow, 3-port feed unit/vessel

Oversized storage hoppers with integrated internal agitation

Waste bins in contained high-vacuum chamber for use with a wide variety of industrial vacuums

Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™

High-strength steel frame capable of being split for container transport

Cyclone storage silos

High-capacity muffler

Blast pressure adjustment

Lifting eyes

Fork pockets

Secondary moisture separator

High-volume pressure relief valve

Centralized controls for precision monitoring and adjustment

No re-pressurization delay for fast response to deadman controls

Options: Customer supplied vacuum for flexibility in recovery options Integrated, vacuum-sealed, closed-top Sponge-Jet Recycler™

Integrated Blasting Room System

Integrates all components in an economical and flexible configuration installed at fixed locations. These systems are well suited for facilities that cannot accommodate costly conventional abrasive blast rooms.

Features of the Blasting Room System:

Integrated, vacuum-sealed, closed-top recycler

No buried conveyors or raised floors

High-capacity muffler

Blast pressure adjustment

Secondary moisture separator

High-volume pressure relief valve

Centralized controls for precision monitoring and adjustment

Enhanced blast room visibility for better quality surface preparation

Each unit contains with the following:

Internal agitation assembly keeps Sponge Media abrasives flowing reliably throughout the vessel

Adjustable, pneumatic driven, auger metering system assures optimal media flow and maximum efficiency at all blast pressures

Integrated E-Stop and remote deadman control system

Standardized parts and maximum reliability by design

High-quality, industry-standard components for long, trouble-free operation, simplified spare part acquisition and replacement

Multi-language labels, instruction manuals and online training tools

Color-coded pneumatic lines for easy troubleshooting

Extended service, permanently lubricated air motor and auger bearings minimize maintenance and wear

 

HAVE QUESTIONS?
Fibron is SSPC certified.
Fibron is certified as a member of the American Concrete Institue. Fibron provides specialized skills in repairing concrete.
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
HAVE QUESTIONS?
Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018