SERVICES

CASE STUDIES

SPONGE-JET

CONTACT

Sponge-Jet: Portable Recyclers

The Leader in Clean, Low Dust, Reusable

Abrasive Blasting

Recyclers are used to separate dust, broken down paint and other materials from reusable Sponge Media™ abrasives. Larger units have higher throughput capacity and remove a greater percentage of fine contaminants than smaller units.

25P Recycler Unit

Limited use to smaller projects with RASP Xtreme Feed Unit. Pneumatically powered. This unit has a limited production capacity but is highly mobile.

Features of the 25P Recycler Unit:

  • Lightweight for ease of mobility
  • Fits in car or SUV
  • Fits through most access hatches and man ways
  • Interlock system with RASP for single-
  • operator transport.
  • Can be transported into small tanks
  • and confined spaces

35P Recycler Unit

This Recycler is pneumatically powered and highly portable. Designed for 170HP blast units and easy mobility, its an excellent addition to any Sponge-Jet project. This unit minimizes the potential for sparks and fires.

Features of the 35P Recycler Unit:

  • Compact, Production capable design
  • Mid-sized, easily relocated on job sites
  • Oversized hopper for Sponge Media ease of flow through system.
  • Lifting frame option available for lifting by overhead crane
  • Practical balance between process speed, size, power requirements and separation efficiency.
  • Clamp system for ease of transport, quick screen inspection and cleaning
  • Pneumatic connection easily connect into existing supply on job site.

 

35E Recycler Unit

This Recycler is electrically powered and highly portable. Designed for 170HP blast units and easy mobility, its an excellent addition to any Sponge-Jet project.

Features of the 35E Recycler Unit:

  • Compact, Production capable design
  • Mid-sized, easily relocated on job sites
  • Oversized hopper for Sponge Media ease of flow through system.
  • Lifting frame option available for lifting by overhead crane
  • Practical balance between process speed, size, power requirements and separation efficiency.
  • Clamp system for ease of transport, quick screen inspection and cleaning
  • Electrical connections use standard outlet, all air is then available for supporting the blast nozzle.

 

70E Recycler Unit

This is a larger recycler designed to support 2 feed units or where extreme dust removal is required. This is an electrically powered unit.

Features of the 70E Recycler Unit:

  • High-Production Design
  • Can support two feed units per recycler
  • Electrical connection use 30 Amp outlet: all air is then available for supporting the blast nozzle
  • Maximum process speed and separation efficiency
  • An extra deck can be added for added for additional dust removal capability.

70P Recycler Unit

This is a larger recycler designed to support 2 feed units or where extreme dust removal is required. This is an pneumatically powered unit.

Features of the 70P Recycler Unit:

  • High-Production Design
  • Can support two feed units per recycler
  • Electrical connection use 30 Amp outlet: all air is then available for supporting the blast nozzle
  • Maximum process speed and separation efficiency
  • An extra deck can be added for added for additional dust removal capability.

Each unit contains with the following:

Efficiently reduces abrasive consumption and dust emissions, separating good, reusable Sponge Media abrasives from dust, contaminants and/or potentially harmful waste, which might normally become airborne dust

Decreases abrasive costs, freight, handling, clean-up and disposal costs up to 95% by reusing Sponge Media 6 to 15 times

Separates used media into 3 streams:oversized waste, good reusable media and fine waste.

Integrated locking wheel system for ease of transport

Standardized parts and maximum reliability by design

High-quality, industry-standard components for long, trouble-free operation, simplified spare part acquisition and replacement

Multi-language labels, Instruction manuals and online training tools

Extended service, motor and bearings minimize maintenance and downtime

Screen size maybe changed for optimized flow and dust requirements

Optional magnetic separator

Want to speak to an expert?

Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018

SERVICES

CASE STUDIES

SPONGE-JET

CONTACT

Sponge-Jet: Portable Recyclers

The Leader in Clean, Low Dust, Reusable

Abrasive Blasting

Recyclers are used to separate dust, broken down paint and other materials from reusable Sponge Media™ abrasives. Larger units have higher throughput capacity and remove a greater percentage of fine contaminants than smaller units.

25P Recycler Unit

Limited use to smaller projects with RASP Xtreme Feed Unit. Pneumatically powered. This unit has a limited production capacity but is highly mobile.

Features of the 25P Recycler Unit:

  • Lightweight for ease of mobility
  • Fits in car or SUV
  • Fits through most access hatches and man ways
  • Interlock system with RASP for single-
  • operator transport.
  • Can be transported into small tanks
  • and confined spaces

35P Recycler Unit

Designed for 170HP blast units and easy mobility, its an excellent addition to any Sponge-Jet project. This unit minimizes the potential for sparks and fires.

Features of the 35P Recycler Unit:

  • Compact, Production capable design
  • Mid-sized, easily relocated on job sites
  • Oversized hopper for Sponge Media ease of flow through system.
  • Lifting frame option available for lifting by overhead crane
  • Practical balance between process speed, size, power requirements and separation efficiency.
  • Clamp system for ease of transport, quick screen inspection and cleaning
  • Pneumatic connection easily connect into existing supply on job site.

35E Recycler Unit

This Recycler is electrically powered and highly portable. Designed for 170HP blast units and easy mobility, its an excellent addition to any Sponge-Jet project.

Features of the 35E Recycler Unit:

  • Compact, Production capable design
  • Mid-sized, easily relocated on job sites
  • Oversized hopper for Sponge Media ease of flow through system.
  • Lifting frame option available for lifting by overhead crane
  • Practical balance between process speed, size, power requirements and separation efficiency.
  • Clamp system for ease of transport, quick screen inspection and cleaning
  • Electrical connections use standard outlet, all air is then available for supporting the blast nozzle.

70E Recycler Unit

This is a larger recycler designed to support 2 feed units or where extreme dust removal is required. This is an electrically powered unit.

Features of the 70E Recycler Unit:

  • High-Production Design
  • Can support two feed units per recycler
  • Electrical connection use 30 Amp outlet: all air is then available for supporting the blast nozzle
  • Maximum process speed and separation efficiency
  • An extra deck can be added for added for additional dust removal capability.

70P Recycler Unit

This is a larger recycler designed to support 2 feed units or where extreme dust removal is required. This is an pneumatically powered unit.

Features of the 70P Recycler Unit:

  • High-Production Design
  • Can support two feed units per recycler
  • Electrical connection use 30 Amp outlet: all air is then available for supporting the blast nozzle
  • Maximum process speed and separation efficiency
  • An extra deck can be added for added for additional dust removal capability.

Each unit contains with the following:

  • Efficiently reduces abrasive consumption and dust emissions, separating good, reusable Sponge Media abrasives from dust, contaminants and/or potentially harmful waste, which might normally become airborne dust
  • Decreases abrasive costs, freight, handling, clean-up and disposal costs up to 95% by reusing Sponge Media 6 to 15 times
  • Separates used media into 3 streams:oversized waste, good reusable media and fine waste.
  • Integrated locking wheel system for ease of transport
  • Standardized parts and maximum reliability by design
  • High-quality, industry-standard components for long, trouble-free operation, simplified spare part acquisition and replacement
  • Multi-language labels, Instruction manuals and online training tools
  • Extended service, motor and bearings minimize maintenance and downtime
  • Screen size maybe changed for optimized flow and dust requirements
  • Optional magnetic separator

Want to speak with an expert?

Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018

SERVICES

CASE STUDIES

SPONGE-JET

CONTACT

Sponge-Jet: Portable Recyclers

The Leader in Clean, Low Dust, Reusable

Abrasive Blasting

Recyclers are used to separate dust, broken down paint and other materials from reusable Sponge Media™ abrasives. Larger units have higher throughput capacity and remove a greater percentage of fine contaminants than smaller units.

25P Recycler Unit

Limited use to smaller projects with RASP Xtreme Feed Unit. Pneumatically powered. This unit has a limited production capacity but is highly mobile.

Features of the 25P Recycler Unit:

  • Lightweight for ease of mobility
  • Fits in car or SUV
  • Fits through most access hatches and man ways
  • Interlock system with RASP for single- operator transport.
  • Can be transported into small tanks
  • and confined spaces

35P Recycler Unit

This Recycler is pneumatically powered and highly portable. Designed for 170HP blast units and easy mobility, its an excellent addition to any Sponge-Jet project. This unit minimizes the potential for sparks and fires.

Features of the 35P Recycler Unit:

  • Compact, Production capable design
  • Mid-sized, easily relocated on job sites
  • Oversized hopper for Sponge Media ease of flow through system.
  • Lifting frame option available for lifting by overhead crane
  • Practical balance between process speed, size, power requirements and separation efficiency.
  • Clamp system for ease of transport, quick screen inspection and cleaning
  • Pneumatic connection easily connect into existing supply on job site.

35E Recycler Unit

This Recycler is electrically powered and highly portable. Designed for 170HP blast units and easy mobility, its an excellent addition to any Sponge-Jet project.

Features of the 35E Recycler Unit:

  • Compact, Production capable design
  • Mid-sized, easily relocated on job sites
  • Oversized hopper for Sponge Media ease of flow through system.
  • Lifting frame option available for lifting by overhead crane
  • Practical balance between process speed, size, power requirements and separation efficiency.
  • Clamp system for ease of transport, quick screen inspection and cleaning
  • Electrical connections use standard outlet, all air is then available for supporting the blast nozzle.

70E Recycler Unit

This is a larger recycler designed to support 2 feed units or where extreme dust removal is required. This is an electrically powered unit.

Features of the 70E Recycler Unit:

  • High-Production Design
  • Can support two feed units per recycler
  • Electrical connection use 30 Amp outlet: all air is then available for supporting the blast nozzle
  • Maximum process speed and separation efficiency
  • An extra deck can be added for added for additional dust removal capability.

70P Recycler Unit

This is a larger recycler designed to support 2 feed units or where extreme dust removal is required. This is an pneumatically powered unit.

Features of the 70P Recycler Unit:

  • High-Production Design
  • Can support two feed units per recycler
  • Electrical connection use 30 Amp outlet: all air is then available for supporting the blast nozzle
  • Maximum process speed and separation efficiency
  • An extra deck can be added for added for additional dust removal capability.

Each unit contains with the following:

  • Efficiently reduces abrasive consumption and dust emissions, separating good, reusable Sponge Media abrasives from dust, contaminants and/or potentially harmful waste, which might normally become airborne dust
  • Decreases abrasive costs, freight, handling, clean-up and disposal costs up to 95% by reusing Sponge Media 6 to 15 times
  • Separates used media into 3 streams:oversized waste, good reusable media and fine waste.
  • Integrated locking wheel system for ease of transport
  • Standardized parts and maximum reliability by design
  • High-quality, industry-standard components for long, trouble-free operation, simplified spare part acquisition and replacement
  • Multi-language labels, Instruction manuals and online training tools
  • Extended service, motor and bearings minimize maintenance and downtime
  • Screen size maybe changed for optimized flow and dust requirements
  • Optional magnetic separator

HAVE QUESTIONS?

Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone:1-705-566-4912 Email: Administration@Fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018
Phone: 1-705-566-4912 Email: Administration@fibron.ca 2018 Kingsway Blvd Sudbury Ontario, P3B 4J8 Copyright Fibron Insulation Inc. | 2018